Sample Mounts

A variety of sample mounts are available in addition to the standard magnetic mount and clip mount. These include mounts for SEM stubs and coverslips. Sample Mount Data Sheet

 

Vacuum Chuck

The Vacuum Chuck allows flat samples to be held without any mechanical contacts to the top surface and with no adhesives on the bottom surface. The Vacuum Chuck has three rings to which vacuum can be routed to accommodate 3 or 4 wafers, or sample sizes between 0.8 and 3”. Note: Some regions of the wafers are not accessible.

Digital Access Module

The Digital Access Module provides digital I/O to the controller for applications such as photon counting and synchronization to the AFM scan. The Extended Digital Interface Module also provides additional programmable TTL outputs. Digital Access Module Data Sheet

 

Extended Z Head

The Extended Z Head provides 40 μm Z range for imaging tall samples and long-range force measurements, with very minimal degradation of imaging performance (atomic resolution is still achievable). Extended Z Head Data Sheet

High Bandwidth Photodiode Option

The High Bandwith Photodiode Option upgrades vertical and horizontal signal detection bandwidth to >5 MHz. The high bandwidth signal is available on two coaxial connectors for external measurement. (Included with the MFP-3D Infinity) 

MFP-3D Leg Extenders

The MFP-3D Leg Extenders raise the scan head to allow imaging of thicker samples up to 30 mm in height (inquire about thicker samples).

 

 

Other MFP-3D AFM Accessory Groups


	Nanomechanical and Thermal Properties

Nanomechanical and Thermal Properties

Accessories include modes for characterizing elastic modulus, loss modulus, loss tangent, and thermal properties


	Nanoelectrical and Electrochemical Properties

Nanoelectrical and Electrochemical Properties

Accessories include CAFM, PFM, STM, ESM, sMIM, NanoTDDB, and an electrochemistry cell  


	Temperature and Other Environmental Control

Temperature and Other Environmental Control

Accessories include sample heaters and coolers, humidity control, glovebox, and more


	Operating in Liquid

Operating in Liquid

Accessories include fluid cells and sample heaters for operation in liquids


	Other Driving Forces

Other Driving Forces

Accessories that enable the application of magnetic fields, tensile loading, high voltage fields, and more  


	Compatibility Matrix

Compatibility Matrix

Availability of options and accessories for different models in the MFP-3D AFM family