柔軟性と磨耗、腐食防止のための表面仕上げによって、金属は見た目も良くなり長持ちします。

様々な金属表面処理の問題を克服するために、金属コーティングは、外観を向上させ、寿命を確保するために、コーティングされていない金属に適用されます。通常は金、銀、クロム、銅、ニッケル、スズ、亜鉛がコーティングに使用され、同様に金属と非金属の両方に適用できます。

チタンは、高速工具鋼ドリルの上にコーティングされているのに対し、クロム合金は耐食性および自動車トリム、浴室付属品の両方で装飾仕上げを提供するために、薄く金属上に塗布されています。亜鉛コーティングはファスナー、ナット、ボルト等のようなアイテムを長持ちさせ、酸化を防ぐために金属表面に塗布されています。

表面処理とXRFによるコーティング分析
X線が比較可能な技術より高い浸透深さを達成するので、蛍光X線分析(EDXRF)分光計X層は高度に金属メッキ分析に適しています。 コー​​ティングは、厚さ、品質管理の要件を満たしていることを確認するために正確な化学組成を分析しなければならないため、すべてが金属の混合物および種々の化合物から構成されています。

 

膜厚測定および表面処理
コーティングは、元のコンポーネントに異なる特性を提供し、単一または複数の層として適用することができます。層の厚さや均一性の慎重な制御は、製品の仕様が満たされていることを確認することが重要であり、生産コストは厳しく管理されています。.

 
膜厚測定は次のものによって行うことができます:

  • 膜厚測定ゲージ: 磁気誘導または渦流技術のために、無電極ニッケルメッキ、Galvanising、メッキ、粉体塗装に基づく。
  • 蛍光X線(XRF)分析、X-Strata: 表面の多種多様な非破壊、迅速な組成分析だけでなく、単一および複数の金属被覆層の厚さ測定
金属表面処理とメッキ工業するためのこれらのアナライザーは、生産性の向上(より少ない構成要素不合格品)の有効化、生産コストを(より少ない材料浪費)を最小化するのに役立ち、費用対効果の高い生産・品質管理ツールです。

このアプリケーションのプロダクト

Electroplating Gauge - CMI 243

Electroplating Gauge - CMI 243

The CMI 243 Electroplating Gauge is a handheld coating thickness gauge specifically designed for electroplating professionals who require quick, easy, accurate and repeatable coating thickness measurements.

Automotive Refinishing Gauge - CMI EZ

Automotive Refinishing Gauge - CMI EZ

The CMI EZ Automotive Refinishing Gauge is a handheld coating thickness gauge that is specifically designed for automotive industry professionals who require quick, easy, accurate and repeatable measurements of paint and lacquer coatings on steel and aluminium automotive panels.

Copper Plating Thickness Gauge - CMI 95M

Copper Plating Thickness Gauge - CMI 95M

The CMI 95M is a handheld copper plating coating thickness gauge that is specifically designed for PCB electronics manufacturers who require quick, easy, accurate and repeatable measurements on printed circuit board substrate materials.

膜厚測定XRF分析装置-X-Strata920

膜厚測定XRF分析装置-X-Strata920

プロセスと品質管理を向上させる膜厚測定と材料分析

Copper Plating Thickness Gauge - CMI 165

Copper Plating Thickness Gauge - CMI 165

The CMI 165 Copper Plating Gauge is a handheld coating thickness gauge that is specifically designed for PCB electronics manufacturers and copper platers who require quick, easy, accurate and repeatable measurements on hot or cold copper traces or panels.

General Purpose Gauge - CMI 153

General Purpose Gauge - CMI 153

The CMI 153 is a general purpose handheld coating thickness gauge that is designed for a wide variety of coating professionals who require quick, easy, accurate and repeatable measurements on non-conductive and non-magnetic coatings over all metal substrates.

Metal, Paint, & Powder Coating Gauge - CMI 233

Metal, Paint, & Powder Coating Gauge - CMI 233

The CMI 233 Metal, Paint & Powder Coating Gauge is a handheld coating thickness gauge that is specifically designed for industrial coating professionals who require quick, accurate and repeatable coating thickness measurements.

Metal, Paint & Powder Coating Gauge - CMI 730

Metal, Paint & Powder Coating Gauge - CMI 730

The CMI 730 Metal, Paint, & Powder Coating Measurement Gauge specifically designed for a full spectrum of coating thickness applications requiring quick, easy, accurate coating measurements over a wide variety of substrates.

General Purpose Gauge - CMI 250

General Purpose Gauge - CMI 250

The CMI 250 is a general purpose handheld coating thickness gauge that is designed for a wide variety of coating professionals who require quick, easy, accurate and repeatable measurements on non-conductive and non-magnetic coatings over all metal substrates.

Copper Surface Measurement Gauge - CMI 563

Copper Surface Measurement Gauge - CMI 563

The CMI 563 Copper Surface Measurement Gauge is a handheld coating thickness gauge that is specifically designed for PCB electronics manufacturers who require quick, easy, accurate and repeatable measurements of copper plating on rigid, flexible, single and double-sided or multi-layer PCB boards.

General Purpose Gauge - CMI 153

General Purpose Gauge - CMI 153

The CMI 153 is a general purpose handheld coating thickness gauge that is designed for a wide variety of coating professionals who require quick, easy, accurate and repeatable measurements on non-conductive and non-magnetic coatings over all metal substrates.

General Purpose Gauge - CMI 250

General Purpose Gauge - CMI 250

The CMI 250 is a general purpose handheld coating thickness gauge that is designed for a wide variety of coating professionals who require quick, easy, accurate and repeatable measurements on non-conductive and non-magnetic coatings over all metal substrates.

PCB Through-Hole & Copper Surface Measurement Gauge- CMI 760

PCB Through-Hole & Copper Surface Measurement Gauge- CMI 760

The CMI760 PCB Thru-Hole & Copper Surface Measurement Gauge is a benchtop coating thickness gauge that is specifically designed for PCB electronics manufacturers who require quick, easy, accurate and repeatable measurements.

Electroplating Gauge - CMI 243

Electroplating Gauge - CMI 243

The CMI 243 Electroplating Gauge is a handheld coating thickness gauge specifically designed for electroplating professionals who require quick, easy, accurate and repeatable coating thickness measurements.